Filter
Top Products
01
6
En
Chapter 1
Before you start
What’s in the box
•Remote control x 1
• Video/audio cable (yellow/white/red plugs) x 1
• AA/R6 dry cell batteries x 2
•Warranty card
•Operating instructions (this document)
•
U.K., Australia and New Zealand models:
Power cord x 1
Others:
Power cord x 2
Putting the batteries in the
remote control
1 Open the rear cover.
2 Insert the batteries (AA/R6 x 2).
Insert as indicated by the / marks into the battery
compartment.
3 Close the rear cover.
Close securely (a click should be heard).
Caution
• Do not use any batteries other than the ones
specified. Also, do not use a new battery together with
an old one.
• When loading the batteries into the remote control,
set them in the proper direction, as indicated by the
polarity marks ( and ).
• Do not heat batteries, disassemble them, or throw
them into flames or water.
• Batteries may have different voltages, even if they look
similar. Do not use different kinds of batteries
together.
•To prevent leakage of battery fluid, remove the
batteries if you do not pla
n to use the remo
te control
for a long period of time (1 month or more). If the fluid
should leak, wipe it carefully off the inside of the case,
then insert new batteries. If a battery should leak and
the fluid should get on your skin, flush it off with large
quantities of water.
• When disposing of used batteries, please comply with
governmental regulations or environmental public
institution’s rules that apply in your country/area.
• WARNING
Do not use or store batteries in direct sunlight or
other excessively hot place, such as inside a car or
near a heater. This can cause batteries to leak,
overheat, explode or ca
tch fire. It can
also reduce the
life or performance of batteries.
D3-4-2-3-3_En
Press lightly on this
part and slide into
the direction of the
arrow.
Insert the negative
() side first.
LX52_VXJ5_IBD_EN.book 6 ページ ２００９年３月３日 火曜日 午後７時２９分