Pioneer DV-79AVi DVD Player User Manual


 
Audio Settings menu
06
54
En
Chapter 6
Audio Settings menu
Note about features in the
Audio Settings menu
None of the features found in the Audio
Settings menu have any effect on sound
output through the i.LINK connector.
Audio DRC
Default setting:
Off
When watching Dolby Digital DVDs at low
volume, it’s easy to lose the quieter sounds
completely—including some of the dialog.
Switching Audio DRC (Dynamic Range
Control) to On can help by bringing up the
quieter sounds, while controlling loud peaks.
How much of a difference you hear depends
on the material you’re listening to. If the mate-
rial doesn’t have wide variations in volume,
you may not notice much change.
1 Press HOME MENU and select ‘Audio
Settings’ from the on-screen display.
2 Highlight Audio DRC, then use the
Joystick (left/right) to change to ‘On’ or
‘Off’ as required.
3 Press ENTER to make the setting and
exit the Audio Settings screen.
Audio DRC is only effective with Dolby
Digital audio sources.
Audio DRC is only effective through the
digital output when
Digital Out
is set to
On
, and
Dolby Digital Out
(see page 62)
is set to
Dolby Digital > PCM
.
The effect of Audio DRC depends on your
speakers and AV receiver settings.
Legato PRO
Default setting:
Off
Legato PRO technology can reveal more high-
frequency detail in CDs and DVDs by upsam-
pling.
1 Press HOME MENU and select ‘Audio
Settings’ from the on-screen display.
Video Adjust
Audio Settings
Play Mode
Setup Navigator
Disc Navigator
Initial Settings
HOME MENU
DVD
Audio Settings 1/ 2
Audio DRC
Legato PRO
Hi-Bit
Virtual Surround
Channel Level
Off
Off
On
Off
Fix
DV-79AVi.book Page 54 Tuesday,August 2, 2005 4:48 PM