Filter
Top Products
Initial Settings menu
08
76
En
• The center speaker (
C
) and subwoofer
(SW) can be set from –6.5 ft. to +6.5 ft.
relative to the front left/right speakers.
• Surround left/right (
LS
/
RS
) speakers can
be set from –20 ft. to +6.5 ft. relative to the
front left/right speakers.
4 Move the cursor left to go back to the
speaker list if you want to modify another
speaker, or press ENTER to exit the
Speaker Distance screen.
• Speaker Distance settings do not affect
SACD playback.
Channel Level
• Default setting:
Fix
You only need to make this setting if you
connected this player to your amplifier using
the 5.1 channel analog outputs.
These settings do not affect any digital audio
output.
When set to
Fix
, the level of each of the 5.1
channel analog outputs is fixed. Choose
Vari-
able
if you want to adjust the relative levels to
balance the surround sound better for your
listening room.
You can set the individual channel levels
between –6dB and +6dB in 0.5 dB incre-
ments using the test tone output as a guide to
set the correct levels. Adjust the levels until
the output level from all channels sounds the
same from your usual listening position. Note
that
Audio Output Mode
(page 74) must be
set to
5.1 Channel
in order to use the test
tone.
Automatic:
Select
Auto
to start the test tone
output. No sound will be heard from the
subwoofer.
As the test tone plays through each speaker in
turn, it is highlighted on-screen. Use the
Joystick (up/down) to adjust the channel
output level of the current speaker. Move the
cursor left to exit the test tone sequence, or
ENTER
to save the settings and exit the
channel level setting screen.
Manual:
Use the Joystick to move the cursor
up/down to select a speaker.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
Audio Output Mode
Speaker Installation
Speaker Distance
Channel Level
Fix
Variable
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
DV-79AVi.book Page 76 Tuesday,August 2, 2005 4:48 PM