Filter
Top Products
Initial Settings menu
08
77
En
Move the cursor right (or press
ENTER
) then
use the Joystick (up/down) to set the channel
output level.
To turn the test tone on/off for an individual
speaker, move the cursor right. The test tone
continues playing even when you select a
different speaker.
To save the settings and exit, press
ENTER
with the channel level field highlighted (as
shown above).
• The subwoofer output will sound quite low
compared to the other speakers.
i.LINK Setup
Audio Out
• Default setting:
On
You only need to make this setting if you
connected this player to other equipment
using the i.LINK interface.
Change this setting to
Off
if the i.LINK inter-
face is still connected but you need to use one
of the other outputs. Changing this setting to
Off
does not affect i.LINK thru data (i.e., if this
player is between two other i.LINK compo-
nents, it will still pass data between them).
Set back to
On
(i.LINK-ready) to be able to use
the i.LINK interface.
Connections Setup
You only need to make this setting if you
connected this player to other equipment
using the i.LINK interface.
This screen shows the equipment connected
using the i.LINK interface.
Components which are able to receive
i.LINK Audio are shown in black (an i.LINK
receiver, for example); those which can’t (a
DV camcorder, for example) are shown in
gray. If the player can’t display the name of a
component, ‘
****
’ is shown; if the name
can’t be determined, Unknown is displayed.
Select the component that you want to set up
the audio output formats for.
This screen shows the output settings for
Dolby Digital, DTS and MPEG audio.
Depending on the other component, these
may be configured automatically. If this
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
Audio Out
Connections Setup
Auto Select Play
DVD-Audio Out
On
Off
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
Audio Out
Connections Setup
Auto Select Play
DVD-Audio Out
Initial Settings
VSX-49TXi
VSX-AX10i
DV-47Ai
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
Initial Settings
Connections Setup
VSX-49TXi : Pioneer
DolbyDigital
DTS
MPEG
PCM
DTS
MPEG
DV-79AVi.book Page 77 Tuesday,August 2, 2005 4:48 PM