Filter
Top Products
Setting the angle icon display
You can set it up so that the angle icon ap-
pears on scenes where the angle can be
switched.
1 Move the joystick up or down to select
ANGLE.
2 Click the joystick.
3 Move the joystick left or right to select
on or off.
Each time you move the joystick left or right
the selected setting switches on or off.
4 Click the joystick.
Angle icon display is set on or off.
Note
Pressing RETURN takes you back to the previous
display.
Setting the aspect ratio
There are two kinds of display. A wide screen
display has a width-to-height ratio (TV aspect)
of 16:9, while a regular display has a TVaspect
of 4:3. Be sure to select the correct TVaspect
for the display you use.
! When using a regular display, select either
LETTER BOX or PANSCAN. Selecting 16:9
may result in an unnatural picture.
1 Move the joystick up or down to select
TVASPECT.
2 Click the joystick.
TV aspect menu is displayed.
3 Move the joystick left or right to select
the desired TV aspect.
! 16:9 – Wide screen picture (16:9) is dis-
played as it is (initial setting)
! LETTER BOX – The picture is the shape of a
letterbox with black bands at the top and
bottom of the screen
! PANSCAN – The picture is cut short at the
right and left of the screen
4 Click the joystick.
The selected TVaspect is set.
Notes
! When playing discs that do not specify
PANSCAN, playback is with LETTER BOX even
if you select PANSCAN setting. Confirm
whether the disc package bears the
16 : 9 LB
mark. (See page 7.)
! Some discs do not enable changing of the TV
aspect. For details, refer to the disc’s instruc-
tions.
! Pressing RETURN takes you back to the pre-
vious display.
Setting the parental lock
Some DVD video discs let you use parental
lock to restrict children from viewing violent
and adult-oriented scenes. You can set the par-
ental lock to your desired level.
! To perform this function, set the remote
control to DVD mode.
! When you set a parental lock level and then
play a disc featuring parental lock, code
number input indications may be dis-
played. In this case, playback will begin
when the correct code number is input.
Setting the code number and level
You need to have registered a code number for
playing back discs with parantal lock.
! We recommend to keep a record of your
code number in case you forget it.
1 Move the joystick up or down to select
PARENTAL.
Operating this unit
En
48
Section
03