Filter
Top Products
Using the position selector
One way to assure a more natural sound is to
accurately position the stereo image, putting
you right in the center of the sound field. The
position selector function lets you automati-
cally adjust the speaker output levels and in-
serts a delay time to match the number and
position of occupied seats. When used in con-
junction with the SFC, the feature will make
the sound image more natural and offer a pa-
noramic sound that envelops you.
1 Press AUDIO to select POSI.
2 Press c/d/a/b to select a listening po-
sition.
Press one of these, c/d/a/b, to select a lis-
tening position as listed in the table.
Button Display Position
c FRT-L Front seat left
d FRT-R Front seat right
a FRONT Front seats
b ALL All seats
# To cancel the selected listening position,
press the same button again.
Note
When you make adjustments to the listening po-
sition, the speaker outputs are automatically set
for appropriate levels. You can tailor the levels
more precisely referring to Adjusting the speaker
output levels using a test tone or Adjusting the
speaker output levels.
Using the Dolby Pro Logic II
Dolby Pro Logic II creates five full-bandwidth
output channels from two-channel sources to
achieve high-purity matrix surround.
! If both the center and the rear speakers are
set to OFF, you cannot use this function.
! Dolby Pro Logic II supports up to 48kHz
sampling rate stereo source and has no ef-
fect on other types of source.
1 Press AUDIO to select PLII.
2 Press c or d to select the desired
mode.
! MOVIE – The Movie mode suitable for
movie playback
! MUSIC – The Music mode suitable for
music playback
! MATRX – The Matrix mode for when FM
radio reception is weak
! OFF – Turn Dolby Pro Logic II off
# You can adjust the music mode only when
MUSIC has been selected.
Adjusting the Music mode
You can adjust the Music mode with the fol-
lowing three controls.
You can adjust the music mode only when
MUSIC has been selected.
When the subwoofer output is on, you can ad-
just the cut-off frequency and the output level
of the subwoofer.
! Panorama (PANO) extends the front stereo
image to include the surround speakers for
an exciting “wraparound” effect.
! Dimension (DIMENSN) allows you to gra-
dually adjust the sound field either towards
the front or the rear.
! Center Width Control (CENTER) allows cen-
ter-channel sounds to be positioned be-
tween the center speaker and the left/right
speakers. It improves the left-center-right
stage presentation for both the driver and
the front passenger.
1 Press AUDIO to select adjusting music
mode.
Available accessories
En
70
Section
04