Filter
Top Products
Selecting discs from the disc title list
Disc title list lets you see the list of disc titles
that have been entered into the multi-CD
player and select one of them to play back.
! You can also perform the following opera-
tions by using the joystick.
1 Press FUNCTION to select TITLE LIST.
2 Press c or d to select a disc from the
disc title list.
# If no title has been entered for a disc,
NO D-TITLE will be displayed.
3 Press a to play your favorite CD title.
That selection will begin to play.
Using CD TEXT functions
You can use these functions only with a CD
TEXTcompatible multi-CD player.
The operation is the same as that of the built-
in DVD player.
Refer to Displaying text information on disc on
page 37.
TV tuner
Basic Operations
You can use this unit to control a TV tuner,
which is sold separately.
For details concerning operation, refer to the
TV tuner’s operation manual. This section pro-
vides information on TV operations with this
unit which differs from that described in the
TV tuner’s operation manual.
1 Band indicator
Shows which band the TV tuner is tuned to.
2 Preset number indicator
Shows which preset has been selected.
3 Channel indicator
Shows which channel the TV tuner is tuned.
1 Press SOURCE to select the TV.
2 Press BAND to select a band.
Press BAND until the desired band is dis-
played, TV1 or TV2.
3 To perform manual tuning, briefly press
c or d.
The channels move up or down step by step.
4 To perform seek tuning, press and hold
c or d for about one second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
# You can cancel seek tuning by briefly pressing
c or d.
# If you press and hold c or d you can skip
broadcasting channels. Seek tuning starts as
soon as you release the button.
Available accessories
En
65
Section
04
Available accessories