Pioneer DVR-230-S DVD Recorder User Manual


 
Getting started
04
18
En
Chapter 4
Getting started
Switching on and setting up
When you switch the recorder on for the first time, you
can make several basic settings using the Setup
Navigator. This takes you through setting the clock and
the internal TV tuner settings.
If you’re using the recorder for the first time, we strongly
recommend you use the Setup Navigator before starting
to use the recorder.
1 Switch on your TV and set the video input to this
recorder.
2 Press the
STANDBY/ON button on the remote
control or the front panel to switch on.
When you switch on for the first time, your TV should
display the Setup Navigator screen. (If the Setup
Navigator doesn’t appear, you can also access it from
the Initial Setup menu; see page 45).
3 Use the
/
(cursor left/right) buttons to
choose a language, then press ENTER.
4 Press ENTER to start setting up using the Setup
Navigator.
If you don’t want to use the Setup Navigator, press
(cursor down) to select
Cancel
, then press
ENTER
to
exit the Setup Navigator.
5 Select ‘Auto Scan’ to start automatic channel
setup, then press ENTER.
Select
Do not set
if you want to skip setting up the
channels (because they have already been set up, for
example).
Use the
/
(cursor left/right) buttons to
choose your country, then press ENTER.
DVD RECORDER
STANDBY/ON
ENTER
OSD Language
OSD Language
English
Complete this setup before you start using your recorder.
Please use the Initial Setup if you want to make more
detailed settings.
Start
Cancel
Setup Navigator
Tuner
Do not set
Auto Scan
Country Australia
DVR-230_YP.book Page 18 Monday, July 4,2005 5:20 PM