Pioneer DVR-230-S DVD Recorder User Manual


 
Recording
06
36
En
Except when finalizing Video mode discs, timer
recording will start when the operation preventing
timer recording has finished.
If a disc is playing when a timer recording is due to
start, playback will automatically stop to allow the
recording to start.
The timer indicator lights in the front panel display
when the timer is active. If the indicator is blinking it
means that there is no disc loaded, or the disc loaded
is not recordable.
Approximately two minutes before a timer recording
is set to start, the recorder will go into timer recording
standby (assuming that a recordable disc is loaded).
In timer recording standby you cannot use some
functions.
1 Press TIMER REC then select ‘Timer Rec (View)’ to
display the Timer Recording screen.
You can also access the Timer Recording screen
from the Home Menu (press
HOME MENU
, select
Timer Recording
, then
Timer Rec (View)
).
The Timer Rec (View) screen appears, from which you
can see timer recordings already set and set new ones.
•If there are more than eight timer programs already
set, press
to switch page (go back using the
button).
You can also clear a timer program before it’s started
by highlighting it and pressing
CLEAR
.
2 Select ‘New Input’ to set a new timer program,
then press ENTER.
3 Enter the timer recording settings.
Use the
/
buttons to select a field; use the
/
buttons to change the value.
Date
– Choose a date up to one month in advance, or
select a daily or weekly program.
Start
– Set the recording start time.
Stop
– Set the recording end time (maximum length
of a timer recording is 12 hours).
CH
– Choose a channel (1–99, excluding skip
channels), or one of the external inputs from which to
record.
RecMode
– Select
XP
,
SP
,
LP
,
EP
,
SLP
or
SEP
(See
Recording time and picture quality
on page 33).
4 After entering all the timer recording
information, highlight ‘Program Set’ and press
ENTER.
The timer recording list screen is displayed again. The
timer program you just input appears in the list.
TIMER REC
CLEAR
ENTER

HOME
MENU
Timer Recording
G-Code system
Timer Rec (View)
Date
Remain 01h20m(SP)
Start
SUN 12/12 07:00
Timer Rec (View)
Stop
1/1
CH
08:00 SPPr01
Rec Mode
New Input
Timer program
already set
Free space on the
loaded disc
Page number
Select here to
input a new
timer program
Timer Rec (View)
Date Start
:SUN 12/12 07 00
Stop CH
:08 00 Pr01
Rec Mode
SP
Program Set
DVR-230_YP.book Page 36 Monday, July 4,2005 5:20 PM