Filter
Top Products
Recording
06
37
En
5 To exit the timer recording screen, press HOME
MENU.
Timer recording using the G-Code
®
programming system
This system makes programming timer recordings very
simple. Most TV guides publish G-Code programming
numbers with their program details. If you want to make
a timer recording of a program, you just input the
corresponding code. The date, start, stop and channel
settings are made automatically. All you have to do is tell
the recorder the recording mode, and whether it’s a
once-only recording or a regular recording.
1 Press ‘G-Code’ to display the G-Code program
screen.
You can also access this screen from the Home Menu
(press
HOME MENU
, select
Timer Recording
, then
G-
Code system.
).
2 Use the number buttons to enter a G-Code
programming number, then press ENTER.
To clear the last digit entered, press
CLEAR
.
3 If you want to change the recording quality, use
the
/
buttons to highlight Rec Mode, then use
the
/
buttons to change.
•See also
Recording time and picture quality
on
page 33 and
Setting the picture quality/recording time
on page 34.
4 After making the settings, press ENTER.
• If you haven’t set up the guide channels (or at least
the guide channel for the G-Code programming
number that you entered), the recorder will prompt
you to enter the channel number that the TV program
is showing on.
Tip
• You can check the timer program settings by
displaying the timer recording screen.
Extending a timer recording in progress
You can extend a timer recording beyond the
programmed end time in two different ways. This can be
useful if a broadcast program overruns, for example.
Moving the end time by 30-minute blocks
1 During timer recording, press and hold
ì
REC for
three seconds.
The timer indicator disappears from the front panel
display.
2 Press
ì
REC repeatedly to extend recording in 30
minute increments.
123
456
7890
CLEAR
ENTER
HOME
MENU
G
-
CODE
G-Code system
G-Code# 3 9 9 2 4
(0) - (9) to input
Timer Rec (View)
Date Start
:SUN 12/12 07 00
Stop CH
:08 00 Pr01
Rec Mode
SP
Program Set
ì REC
TIMER REC
ENTER
HOME
MENU
DVR-230_YP.book Page 37 Monday, July 4,2005 5:20 PM