Filter
Top Products
The Initial Setup menu
08
48
En
Set Guide Preset
• Default setting:
n/a
Guide channels are used by the G-Code system so that
the channel number specified in the G-Code
programming numbers can be guaranteed to
correspond to the correct station.
1 Select ‘Set Guide Preset’, then press ENTER.
2 Assign channel numbers to the guide channels as
necessary.
Look in your TV guide to see which channel numbers
should be assigned to which guide channels.
• Use the
/
buttons to change the guide channel
for setting.
• Use the
/
buttons to change the channel
number.
• Use the
/
button to display the previous/next
10 guide channels.
3 To return to the previous screen, press ENTER or
RETURN.
OSD Language
• Default setting:
English
This sets the language of the on-screen menus and
displays.
• Select ‘OSD Language’ then use the
/
buttons to select a language option.
Display
• Default setting:
On
You can have the recorder show or hide on-screen
operation displays (for Play, Stop, etc.), and choose
whether to switch the front panel display on or off when
the recorder is in standby.
Remote Control
• Default setting:
Recorder1
You only need to set this if you are using more than one
Pioneer DVD recorder in the same room.
So that each remote control operates only its own
recorder, make this setting different for each recorder
and remote in the room.
Guide - PresetAuto CH Setup
Manual CH Setup
Tuner
Set Guide Preset
Channel Swapping
Guide - Preset 1/26
1
2
3
Auto CH Setup
Manual CH Setup
Set Guide Preset
Pr01 6
7
8
4 9
5 10
- - - -
Pr02
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
Set Guide Preset
Channel Swapping
Basic
Disc
Video
Audio
Recording
Playback
Clock
Tuner
OSD Language
Display
Remote Control
Basic
Setup Navigator
Power Save
OSD Language
OSD Language
English
Basic
Disc
Video
Audio
Recording
Playback
Clock
Tuner
OSD Screen
Front Panel
OSD Language
Display
Remote Control
Basic
Setup Navigator
Power Save
OSD Screen
Display
On
Front Panel
On
Basic
Disc
Video
Audio
Recording
Playback
Clock
Tuner
OSD Language
Display
Remote Control
Basic
Setup Navigator
Power Save
DVR-230_YP.book Page 48 Monday, July 4,2005 5:20 PM