Filter
Top Products
The Initial Setup menu
08
45
En
Chapter 8
The Initial Setup menu
Using the Initial Setup menu
The Initial Setup menu is where you can set various
recorder options for sound, picture, language and so on.
• Press HOME MENU and select ‘Initial Setup’.
• Some settings can only be changed when the
recorder is stopped. during playback these settings
are grayed out in the Initial Setup menu.
• Except for the Setup Navigator, menu screens are
exited automatically after 20 minutes of inactivity.
Basic settings
Clock
The date (day, month, year) and time must be set before
you can use any of the timer recording features.
The clock can be set automatically if there is a broadcast
station transmitting clock signals, or manually. Select
Auto
to set the clock automatically or
Manual
to display
the clock setting screen.
• Auto clock setting
Some TV channels broadcast time signals together
with the program. This recorder can use these
signals to set the clock automatically.
1 Select ‘Auto’.
2 Set ‘Clock Set CH‘ to the channel preset number
that broadcasts a clock signal.
3 Move the cursor down to ‘Start’ and press
ENTER.
The time and date is displayed when the recorder has
successfully set the clock.
• If the time could not be set, press
RETURN
to go back
to the previous screen and select
Manual
.
Disc Navigator
Editing
Timer Recording
Initial Setup
Play Mode
HOME MENU
Exit
HOME MENU
ENTER
Confirm
Basic
Disc
Video
Audio
Recording
Playback
Clock
Tuner
OSD Language
Display
Remoto Control
Initial Setup
Setup Navigator
Power Save
Manual
Clock
Date
Time
Clock Set CH
Auto
Auto
Manual
Date
Time
Clock Set CH
Start
Pr01
Auto
SAT 01 / 01 / 2005
00 : 00
Auto
Manual
Date
Time
Clock Set CH
Start
Pr01
Auto
SAT 01 / 01 / 2005
00 : 00
Auto
Manual
Date
Time
Clock Set CH
Start
Next
Pr01
Auto TUE 01 / 02 / 2005
12 : 00
DVR-230_YP.book Page 45 Monday, July 4,2005 5:20 PM