Filter
Top Products
The Disc Setup menu
12
96
En
New DVD-R discs are ready for Video mode recording
when you load them, but it is also possible to initialize
them for VR mode recording.
The initialize menu here lets you reinitialize a disc, for
example if you want to change the recording format of
the disc. See Initializing a recordable DVD disc on page 60
for detailed instructions.
Finalize settings
1
Finalize
Finalizing ‘fixes’ the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
See Playing your recordings on other DVD players on
page 59 for detailed instructions.
Undo Finalize
You can undo the finalization on DVD-RW discs recorded
on this recorder in Video mode. You need to do this if you
want to record more material or edit material already on
the disc.
You can also undo the finalization of VR mode discs
which have been finalized on other DVD recorders. If
when you load a disc the message This disc cannot be
recorded. Undo the finalization is displayed, use this
command to be able to record on the disc using this
recorder.
1 From the Disc Setup menu, select ‘Finalize’, then
‘Undo Finalize’ from the finalize options.
2 Select ‘Start’.
Optimize HDD
You’ll see a message appear on-screen recommending
you optimize the HDD.
As you record, erase and edit recordings, the HDD file
system gradually becomes fragmented. Periodically, the
HDD will need optimizing to ‘clean up’ all the fragmented
files.
Important
• Optimizing the HDD can take as long as eight hours.
During optimization, playback and recording are not
possible.
• Canceling optimization mid-way does not undo the
optimization already done, so the HDD will be partly
optimized.
• Select ‘Optimize HDD’ from the disc Setup menu.
• Select ‘Start’ to optimize.
A progress bar indicates how long there is left to go.
Initialize HDD
When your DVD recorder is working without a problem
this option is not visible in the Disc Setup menu.
However, if the HDD file system becomes corrupted for
some reason, you initialize the HDD to fix the problem.
Note that initializing the HDD will erase all the data on it.
• Select ‘Initialize HDD’ from the disc Setup menu.
• Select ‘Start’ to initialize.
Note
1.You cannot finalize a disc or use the Undo Finalize command if the TV line system of the disc is different to the current setting of the recorder.
See Additional information about the TV system settings on page 107 for how to change the recorder’s setting.
DVD-R DVD-RW
DVD-RW
HDD
Basic
Initialize
Finalize
Optimize HDD
Disc Setup
Start Optimization
Optimize HDD
Start
Optimize HDD
HDD
Basic
Initialize
Finalize
Optimize HDD
Disc Setup
Initialize
Optimize HDD
Start
Initialize HDD
11 Disc_Setup.fm 96ページ ２００５年２月１４日 月曜日 午後７時２２分