Filter
Top Products
The Initial Setup menu
125
En
16
Analog Tuner
Auto Channel
Setting
Auto Scan
Select your country and then wait for the recorder to
auto tune into channels in your area. After auto scan
has finished, the channel mapping screen appears
showing which channels have been assigned to
which programme numbers. You can skip unwanted
channels using the Manual CH Setting option below.
Press
HOME MENU
to exit the channel mapping
screen.
Download from
TV
If your TV supports this feature you can download all
the channels that your TV is tuned to via the SCART
input. Select your country and then wait for the
download to complete. After the download is
complete, the channel mapping screen appears, as
above.
See also the operating instructions that came with
your TV for more information.
Manual CH Setting Next Screen
Proceed to the next screen if you need to adjust any
of the settings made by auto tuning. Select your
country, then proceed to the manual channel setting
screen:
• Change channel presets using the
Smart Jog
.
• To skip the displayed channel (because there is no
station assigned to that channel), change the
Skip
setting to
On
.
• Set the
CH SYSTEM
setting to match the channel
system of your country or region.
• Set the
CHANNEL
setting to the channel you want
to assign to the current channel preset.
• To manually fine tune the channel, change the
AFT
setting to
Off
then adjust the
Level
setting.
• Set the
Sound System
setting to match the sound
system of your region.
• The
Name
field allows you to input a name of up to
five characters for the current channel preset.
• If the currently selected channel is scrambled
requiring a decoder connected to the
AV2 (INPUT 1/
DECODER)
, set the
Decoder
setting to
On
.
Channel Swapping Next Screen
Proceed to the next screen to swap channel
assignments of different presets so that you can
group together presets that naturally go together.
Select two presets to swap then press
ENTER
.
Setting
Options Explanation
DVR550HXS_WV_EN.book 125 ページ ２００７年３月３０日 金曜日 午前１０時４８分