Filter
Top Products
Getting started
04
32
En
14 Select ‘Finish Setup’ to exit
the Setup Navigator, or ‘Go Back’ if you
want to start again.
That completes basic setup using the Setup
Navigator.
• If there are blank channels with no
station, you can set these to skip using
the manual channel setting. See
Manual
CH Setting
on page 125.
For users receiving digital
broadcast services
This unit can set its internal clock
automatically from digital broadcasts.
However, depending on the broadcaster, the
clock information received may not be
accurate.
Use the following procedure (while the
recorder is not recording) to set the clock
manually.
1 Press HOME MENU.
2 Select ‘Initial Setup’ > ‘Basic’ >
‘Clock Setting’.
3 Highlight the time setting.
4 Press to display the manual clock
setting screen.
5 Set the correct time.
Return to automatic clock setting
• To return to the automatic clock setting,
follow the instructions for ‘Replace
Channels’ (page 123).
Setting up the GUIDE Plus+®
system
This section is only applicable if you chose to
use the GUIDE Plus+ system as the EPG type
in step
10
of the Setup Navigator above.
The GUIDE Plus+® system is a free,
interactive on-screen television
programming guide. The system offers
programme listings for all major channels,
one-touch recording, search by genre,
recommendations according to your profile
and more.
For the GUIDE Plus+ system to function
correctly, it is important that you set the
language and country correctly in the Setup
Navigator, and that you have performed a
scan for available channels, as these are all
used by the GUIDE Plus+ system. If any of
these things are not yet set, please run the
Setup Navigator first (see
Switching on and
setting up
on page 29).
TV listings information is received via ‘host
channels’. In order to receive the correct TV
listings information for your country or
region you need to set up the GUIDE Plus+
system and ‘download’ the TV listings
information. The initial download can take
up to 24 hours, but once this is done, all
future updates are automatic.
1 Display the GUIDE Plus+ setup
menu.
The language and country settings are
already set to whatever you selected in the
Setup Navigator.
ENTER
k
Setting
Line System
e
r Save
p
Navigator
p
Navigator
Setup is complete!
Finish Setup
Go Back
Finish Setup
HOME MENU
ENTER
ENTER
GUIDE
DVR550HXS_WV_EN.book 32 ページ ２００７年３月３０日 金曜日 午前１０時４８分