Filter
Top Products
Using the digital electronic programme guide
06
52
En
3 Enter the timer recording settings.
Use the
/
buttons to select a field; use
the
/
buttons to change the value
1
.
•
CH
– Choose a channel (Pr 1 to Pr 99 for
analog channels and available digital
channels (excluding skip channels)), or
one of the external inputs from which to
record.
•
Date
– Choose a date up to one month in
advance, or select a daily or weekly
programme.
•
Start
– Set the recording start time.
•
Stop
– Set the recording end time
(maximum length of a timer recording is
24 hours).
•
Extend
– Extend the end time of the
timer recording (select
Off
,
10
,
20
or
30
mins.)
4 If you want to change the recording
mode, recording destination, etc., select
‘Set Detailed’.
In this area you can set:
Record to
– Select
HDD
for hard disk
recording or
DVD
for DVD recording
2
.
Recording Mode
– Select from
AUTO
3
,
XP
,
SP
,
LP
,
EP
,
SLP
,
SEP
(See
Setting the picture
quality/recording time
on page 63). If Manual
Recording is on, then you can also select the
LPCM
setting,
XP+
or
MN
(press
ENTER
then use the
/
buttons to select the
level).
VPS/PDC
4
– Choose whether or not to use
VPS/PDC when making timer recordings of
analog programmes (see
About timer
recordings
on page 67).
Auto Replace Rec.
– Automatically erases
the previous daily or weekly recording when
the next one is recorded.
Genre – Select a record genre (for HDD
recording only).
Note
1 You cannot change the CH, Date, Start, Stop, Extend and title name when you have EPG Link set to On (see
page 53).
Timer Programme Set
Manhattan Open Tennis
CH Date Start Stop Extend
D.TV003
SUN 1/4 18:00 19:00 Off
Enter Details
Detailed Settings
Record To HDD
Recording Mode XP
VPS/PDC ------
Auto Replace Rec. ------
Genre No Category
Store Programme
Cancel
VPS/PDC 0/8
Set Title Name
Set Detailed
2• For a DVD timer recording, if Optimized Rec (see Optimized Rec on page 130) is set to On (and VPS/PDC is
off), the recorder will adjust the recording quality to try and fit the recording on the disc. If the recording will not
fit onto the disc even on MN1 recording quality (MN4 for DVD+R/+RW) then the Recovery Recording feature
will automatically make the recording to the HDD instead.
• If there is very little free space left on the HDD, an Auto Replace Recording may not complete successfully.
• If the HDD is being used for playback or high-speed copying when an Auto Replace Recording is due to start,
the new timer recording will not replace the old one. However, the next time the timer recording starts, both of
the older two programmes will be erased.
3 This mode maximizes the recording quality to fit on to a single DVD disc. Can also be used when recording to
HDD.
4• If you set the timer recording to use VPS/PDC, you must switch the recorder into standby before the timer
recording is due to start for it to work correctly. For non-VPS/PDC timer recordings there is no need to switch
the recorder into standby.
• Optimized Recording will not work if VPS/PDC is on.
• Up to eight timer recordings can be set with VPS/PDC.
• VPS/PDC cannot be set for recordings made from digital broadcasts or an external input, or when the
recording mode is set to AUTO.
DVR550HXS_WV_EN.book 52 ページ ２００７年３月３０日 金曜日 午前１０時４８分