Filter
Top Products
Additional information
14
104
En
If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the
outlet and insert again to return to normal operating conditions.
Front panel display shows ‘LOCK’
when a button is pressed
• The Child Lock is on; turn off in order to use the recorder (page 44).
Can’t use One Touch Copy (HDD to
DVD)
• Make sure that there is a recordable DVD loaded with some free space for
recording and fewer than 99 titles already on the disc. Also make sure that for a
Video mode disc, the disc isn’t finalized.
• If the title currently playing contains material that is copy-once protected, One
Touch Copy will not work.
• If the currently playing HDD content was recorded in XP+ mode, the One Touch
Copy feature can’t be used.
• One Touch Copy doesn’t work if the recorder is already recording to DVD.
Can’t use One Touch Copy (DVD to
HDD)
• Make sure that there is space available on the HDD and that there are fewer than
999 titles on the HDD.
• One Touch Copy doesn’t work if the recorder is already recording to the HDD.
The picture freezes and the front
panel and remote control buttons
stop working
• Press
STOP
then try restarting playback.
• Press the front panel
STANDBY/ON
button to switch the power off, then
switch back on and restart playback. If the power fails to switch off, press and hold
STANDBY/ON
for 10 seconds until the power switches off.
The device connected to the USB
port isn’t recognized
• Check that the device is compatible with this recorder (page 19).
• Use a USB cable shorter than five meters long.
• Check that the cable is properly connected at both ends.
• Try switching this recorder into standby then back on.
• Try using the
Restart USB Device
option (page 97).
Cannot import picture files from a
connected USB camera
• Check that the device is compatible with this recorder (page 19).
• Check that the camera is switched on.
• If several USB devices (camera, USB memory, card reader, etc.) are connected
together, it’s possible that only the first device connected to this recorder will be
recognized.
Can’t print from the USB printer
• Check that the device is compatible with this recorder (page 19).
• Connect the printer to the type B USB port on the rear of the recorder (page 12,
page 19).
• Make sure that the printer is switched on.
• Try the Confirm Printer option to check that the recorder recognizes the printer
(page 97).
• Depending on the printer, the index print option may not work.
Problem
Remedy
DVR630HS_RL.book 104 ページ ２００５年３月１８日 金曜日 午前９時４９分