Filter
Top Products
Recording
05
39
En
• The timer indicator ( ) lights in the front panel
display when the timer is active. If the indicator is
blinking it means that (for a DVD timer recording)
there is no disc loaded, or the disc loaded is not
recordable (for an HDD timer recording it means that
the HDD is not recordable).
• Approximately two minutes before a timer recording
is set to start, the recorder will go into timer recording
standby. In timer recording standby you cannot use
some functions.
• The maximum length for timer recordings made to
the HDD is 24 hours. However, because one title
(HDD) is limited to 12 hours, recordings over 12
hours will be spread over two titles. Note that there
will be a break in the recording of a few seconds
between titles.
Easy Timer Recording
As the name suggests, Easy Timer Recording makes
setting up a timer recording as simple as possible.
1 Press HOME MENU and select ‘Timer Recording’
then ‘Easy Timer’.
2 Set the TV channel and recording quality.
• Use the
CH +/–
buttons to set the channel you want
to record.
• Use the
REC MODE
button to set the recording
quality. Press repeatedly to switch between
XP
,
SP
,
LP
,
EP
,
SLP
,
SEP
and
AUTO
(and
MN
if manual
recording mode is on).
•
DVD recording:
The
AUTO
option automatically sets
the best recording quality for the space available on
the disc loaded at the time of recording.
•
HDD recording:
The
AUTO
option automatically sets
the best recording quality that would fit on to a blank
DVD disc.
• Press
DVD
to record to DVD disc, or
HDD
if you want
to record to the hard disk drive.
3 Use
///
to move the cursor to the
recording start date and time on the grid.
• You can move the cursor forward or back an hour at
a time using the
and
buttons.
Each row of the grid is one day (you can set the timer
recording for up to a month in advance). Each column is
a 15 minute interval.
The darker area represents time that has already passed
and can’t therefore be selected. The lighter area is time
that’s available.
4 Press ENTER to set the start time.
The start date and time is displayed in the middle of the
screen.
• You can go back and reset the start time if you need
to by pressing
RETURN
.
RETURN
HOME
MENU
HDD DVD
ENTER
CH
REV SCAN FWD SCAN
REC MODE
Easy Timer Recording
Pr 7
SAT 1/01
9:30
HDD
CHANNEL
+
/
–
HDD/DVD
SP
REC MODE
8:00
9:00 10:00 11:00 12:00 13:00 14:00
– ––:––
1/01
2/01
3/01
Easy Timer Recording
Pr 7
SAT 1/01
11:45
HDD
CHANNEL
+
/
–
HDD/DVD
SP
REC MODE
8:00
9:00 10:00 11:00 12:00 13:00 14:00
– ––:––
1/01
2/01
3/01
Current time
Recording start time
DVR630HS_RL.book 39 ページ ２００５年３月１８日 金曜日 午前９時４９分