Filter
Top Products
Recording
05
40
En
5 Use the
/
to move the cursor to the
recording end time on the grid.
As you move the cursor around the grid, an arrow
stretches from the start time to the current cursor
position, representing the length of the recording. A
recording of up to six hours can be set.
6 Press ENTER to set the end time.
7 Select ‘Yes’ to set the timer recording and exit, or
‘No’ to go back to the timer recording screen.
• You can check the timer recording details you just set
from the main timer recording screen (see
Setting a
manual timer recording
on page 41).
Timer recording using the G-Code™
programming system
This system makes programming timer recordings very
simple. Most TV guides publish G-Code programming
numbers with their program details. If you want to make
a timer recording of a program, you just input the
corresponding code. The date, start, stop and channel
settings are made automatically. All you have to do is tell
the recorder the recording mode, and whether it’s a
once-only recording or a regular recording.
Note that if the country setting is incorrect (set in the
Setup Navigator), timer recordings made using the G-
Code programming system may not work as expected.
1 Press ‘G-Code’ to display the G-Code program
screen.
You can also access this screen from the Home Menu
(press
HOME MENU
, select
Timer Recording
, then
G-Code
).
• Use the number buttons to enter the G-Code
programming number. (To clear the last digit
entered, press
CLEAR
.)
• You can also use the
///
buttons to select
digits from the on-screen display.
2 After making the settings, select ‘Enter’ and
press ENTER.
The timer recording screen appears with the timer
program you just set.
3 Confirm that the settings are correct.
If the channel number isn't displayed, use the
/
buttons to highlight
CH
, then use the
/
buttons to set
the correct channel number.
• If the channel number is set, but incorrectly, set up
the guide channel (see
G-Code CH Setting
on
page 93).
Easy Timer Recording
Pr 7
SAT 1/01
11:45
HDD
CHANNEL
+
/
–
HDD/DVD
SP
REC MODE
11:00
12:00 13:00 14:00 15:00 16:00 17:00
– 13:45
1/01
2/01
3/01
Recording start time
Recording end time
HOME
MENU
HDD DVD
CLEAR
ENTER
CLEAR
CH
REC MODE
ì
G
-CODE
+
G-Code#
1 3
4 5 6
7 8 9
0
Clear Enter
Cancel
2
DVR630HS_RL.book 40 ページ ２００５年３月１８日 金曜日 午前９時４９分