Filter
Top Products
22 ENGLISH
8.2 Placing batteries
• Use only R6 AA 1.5V non-rechargeable carbon-zinc or alkaline batteries.
• Do not mix old and new batteries.
•Never mix different types of battery (standard, alkaline, etc.).
This may reduce the life of the batteries.
1 Remove battery cover.
Lift tag on back of remote control upwards.
2 Position batteries
Place batteries as shown inside battery compartment.
3 Close battery cover.
8.3 Using the remote control
• Be sure to place fresh batteries in the remote control before use.
•Always point the remote control directly at the infrared receiver eye on the front of the
player; making sure there are no obstructions in the path of the infrared beam.
• The distance between the remote control and the infrared receiver eye should be no
more than 23 feet directly in front of the player and no more than 16 feet at an angle of
30 degrees to either side.