Pioneer VSX-1018AH-K TV Receiver User Manual


 
Connecting your equipment
03
24
En
Plugging in the receiver
Only plug in after you have connected all your
components to this receiver, including the speakers.
Caution
Handle the power cord by the plug part. Do not pull
out the plug by tugging the cord, and never touch the
power cord when your hands are wet, as this could
cause a short circuit or electric shock. Do not place
the unit, a piece of furniture, or other object on the
power cord or pinch the cord in any other way. Never
make a knot in the cord or tie it with other cables. The
power cords should be routed so that they are not
likely to be stepped on. A damaged power cord can
cause a fire or give you an electric shock. Check the
power cord once in a while. If you find it damaged,
ask your nearest Pioneer authorized independent
service company for a replacement.
The receiver should be disconnected by removing the
mains plug from the wall socket when not in regular
use, e.g., when on vacation.
•Make sure the blue STANDBY/ON light has gone
out before unplugging.
Plug the power cord into a power outlet.
VSX-1018AH_KU.book Page 24 Monday, March 10, 2008 4:51 PM