Pioneer VSX-1018AH-K TV Receiver User Manual


 
Other connections
08
64
En
Using the SR+ mode with a Pioneer flat
panel TV
When connected using an SR+ cable, a number of
features become available to make using this receiver
with your Pioneer flat panel TV even easier. These
features include:
On-screen displays when making receiver settings,
such as speaker setup, MCACC setup, and so on.
On-screen volume display.
On-screen display of listening mode.
Automatic video input switching on the flat panel TV.
Automatic volume muting on the flat panel TV.
See also SR+ Setup for Pioneer flat panel TVs on page 70
for more on setting up the receiver.
Important
The SR+ features do not work when any of the iPod
USB, XM or SIRIUS Radio function is selected.
1 Make sure that the flat panel TV and this receiver
are switched on and that they are connected with the
SR+ cable.
See Using this receiver with a Pioneer flat panel TV on
page 63 for more on connecting these components.
Make sure you have also selected the display input to
which you’ve connected the receiver in The Input
Setup menu on page 67.
2 To switch SR+ mode on/off, press
RECEIVER
, then
press the
SR+
button.
The front panel display shows SR+ ON or SR+ OFF.
•The automatic video input switching and the
automatic volume muting features are enabled
separately; see SR+ Setup for Pioneer flat panel TVs on
page 70.
INPUT
123
SLEEPMCACCGENRE
456
A.ATTSBchSR+
789
CLASS
MASTER
VOLUME
CH LEVELD.ACCESS
0
ENTER
SR+
7
TV CTRL
MAIN
ZONE 2
ANT
AUDIO
DISPLAY
MPX
SIGNAL SEL
CH
RECEIVER
MEM
RECEIVER
VSX-1018AH_KU.book Page 64 Monday, March 10, 2008 4:51 PM