Filter
Top Products
- - 22
Speaker Setup (Multi-Channel Mode)
This DVD-Recorder is 6-channel DVD-Audio capable
(requires a home theater audio receiver). If you are
connecting the DVD-Recorder to a home theater
audio receiver, refer to the owner’s manual that came
with your home theater audio receiver in order to
select the desired multi-channel audio mode. Note:
This option will not be available if the “Down Mix”
selection is not set to “OFF”.
1. From the Main Menu use the arrow buttons to
highlight “Setup Menu”
2. Press the Right arrow button to view the
Setup Menu options
3. Use the Down arrow to highlight “Speaker”
4. Press the ENTER button
5. Use the Up and Down arrows to move to the
desired function
6. Use the Right arrow to select the desired
function
7. Use the Up and Down arrow to change the
option of each function
8. Once an option is selected, press the ENTER
button to save selection.
9. Press the left arrow to move back to function
select
10. Once all options are changed to desired
setting, press the SETUP button to exit
Figure 7. Activating The Center, Rear and Subwoofer Speakers
While remaining in the Speaker Setup function, use
the arrow buttons on the remote control to select the
amount of center and rear speaker delay desired.
Press the ENTER button on the remote control to
establish the final delay distance.