Filter
Top Products
Administrator’s Guide for the V500 System
5 - 10 www.polycom.com/videodocumentation
Configuring for SNMP Management
To configure the V500 system for SNMP management:
1. Access the SNMP configuration screen either in the V500 web interface or on
the V500 system:
• In the V500 web interface, go to System Setup > Admin Settings > Global
Services > SNMP.
• On the V500 system, go to System > Admin Settings > Global Services >
SNMP.
2. Configure these settings:
Setting Description
Enable SNMP Allows administrators to manage the system remotely using
SNMP.
Community Specifies the SNMP management community in which you want
to enable this system. The default community is public.
Contact Name Specifies the name of the person responsible for remote
management of this system.
Location Name Specifies the location of the system.
System Description Specifies the type of video conferencing device.
Console IP Address Specifies the IP address of the computer you intend to use as
your network management station and to which SNMP traps will
be sent.