Filter
Top Products
DVR User’s Manual
12
Alarm LED
The LED lights up when an alarm is triggered.
HDD LED
The LED lights up while the HDD is processing data to or from the
connected HDD.
3.1.2 Functional Keys
This section describes the functional keys, which are for normal operation, on
the front panel of the DVR.
Please refer to the Setup Guide for the graphical illustration of functional
keys.
CHANNEL
• In both Live and Playback modes, press the CHANNEL key to view the
corresponding video in full screen. The number of the CHANNEL keys
corresponds to the number of cameras supported by the unit.
• In Dome Control mode, the key “1” is used to access the Set/Go preset
menu; the key “2” is used to hide or display the dome camera setting
parameters.
COPY
In Playback mode, press COPY to select the start and end time of the export
video. Refer to section Video Export for detailed information.
CALL
• In Live mode, press this key once to control the call monitor. Alternatively,
press and hold this key for 3 seconds to control the 2nd main monitor.
• In Dome Control mode, press CALL in association with ENTER to enter
the OSD setup menu of the dome camera.
DOME
Press the key to enter Dome Control mode. Please refer to Section Dome
Control for detailed controlling operation.