Filter
Top Products
DVR User’s Manual
17
3.3 Power On / Shutdown the Unit
If the DVR must be shutdown for any reason, please use the proper shutdown
and power on procedures to avoid damaging the DVR.
To Power On the Unit:
Check the type of power source before plug in the power cord to the DVR (the
acceptable power input is between AC110V ~ AC240V), and power on the
unit using the power switch on the rear panel.
The color bar and system checking information will be shown on the monitor
and then disappear when the unit has been completely powered up.
To Restart / Shutdown the Unit:
Press MENU and input the username and password that has sufficient
authority to access the OSD setup menu. Select <Shutdown> in Main Menu
and press ENTER to enter the Shutdown menu, which displays as follows.
Shutdown
1. Power Off
2. Reboot
Execute
Execute
Power Off
Select this item to shut down the unit. Do not remove the power during shut
down until the message “You can safely turn off DVR now!” displays.
Reboot
Select this item to reboot the unit. The color bar and system checking
information are displayed on the monitor until the unit is completely restarted.