Filter
Top Products
DVR User’s Manual
45
4.5.2 Dome Protocol Setup
The Dome Protocol item lists the available dome protocols for communicating
with dome cameras connected to the DVR. From the Main menu, select
<Camera Setup> and press ENTER. The following menu is displayed.
Analog Camera
1. Analog Camera Select
2. Dome Protocol
3. Dome ID
4. Camera Title
5. Covert
6. Termination
7. Brightness
8. Contrast
9. Saturation
10. Hue
CH1
None
0
CH1
No
Yes
0
0
0
0
To configure dome protocol, select a camera first and set the communications
protocol associated with dome camera using the Direction keys and ENTER.
The available protocol includes <DSCP>, <AD422>, <Pelco D>, <Pelco P>,
<Fastrax 2>, <JVC>, <Panasonic_C>, <Panasonic_N>, and <None>.
NOTE: The settings become effective after saving the changes and
exiting from the menu.
4.5.3 RS485 Setup
The DVR controls the dome cameras via RS-485 communication protocol.
The RS-485 parameters of the DVR must be set to the same as the
parameters set in dome camera.
Users are allowed to change the RS-485 settings of the DVR. Select <System
Setup> in Main menu, then select <RS485 Setup> from the System Setup
menu and press ENTER. The following menu is displayed.
RS485 Setup
1 Unit ID
2 Baud Rate
3 Bits
4 Stop
5 Parity
224
9600
8
1
None