Filter
Top Products
User’s Guide CineMaster 9
Note: Be sure to align the connector properly with the pins.
Typically, the ribbon cable will have a red stripe running along one
edge. This edge should be nearest to Pin 1 on the Video Port
Connector, located nearest to the metal bracket.
10. Replace the computer cover and plug in the computer.
11. At this point you can connect an AC-3 Decoder/Amplifier to the
S/PDIF output connector on the rear bracket.
Note: Inferior quality signal cables or excessive cable length can
degrade your sound and video quality.
12. Power on the computer and proceed to the Software Driver
Installation section.