Filter
Top Products
User’s Guide CineMaster 15
DVD Player Software Installation
Installation
Note: The installation procedure described in this section assumes the
application is supplied on floppy disks.
If the application is provided on a single CD-ROM, the following
procedure still applies wherever references are made to individual
floppy disks, simply insert the single CD-ROM disc and reference the
appropriate drive letter for your DVD-ROM drive (e.g. D:\ or E:\).
The DVD Player is supplied on a set of two floppy disks labeled
“ DVD P
LAYER
D
ISK
1
OF
2” and “DVD P
LAYER
D
ISK
2
OF
2” . The following procedure describes the installation
process.
Note: It is strongly recommended that you exit all Windows programs
before you begin this installation procedure.
1. Insert the “ DVD P
LAYER
D
ISK
1
OF
2” disk into the
3.5” drive slot on your computer.
2. Click on the Start button in the bottom left corner of the Windows
95 screen, then select Run from the list of options that appears.
3. Type a:\setup or b:\setup depending on the ID of the drive in
which you’ve inserted the installation disk.
4. Just follow the simple on-screen instructions to complete the
installation process. The installation program will copy files to the
hard disk and create a Windows program group or folder with an
icon for starting the DVD Player.
That’s it; you can now play DVD titles on your computer!
Note: The installer will not ask for Disk 2 if it is not needed for
installation in your system; this is not abnormal.