Filter
Top Products
Chapter 2: Quick Start
23
Accessing a Computer or Channel
Use the Selection Menu to access any computer connected to the
TMCAT17 switch.
The first OSD menu that appears after login is the Selection Menu, which
does not show any channel name by default until you assign them.
To select a channel on the Selection Menu:
1. If you do not find the channel on the current page, press Page Down
or Page Up to go to the next or previous page.
2. Press
or to move the highlight bar to the channel you want to
select.
Tip: You can press the corresponding number shown in the No
column for that channel to quickly highlight it.
3. Press Enter.
The Selection Menu disappears. The video of the accessed computer
appears on the screen. You can control the computer with the keyboard
and mouse.
TMCAT17 switches do not support real-time channel detection. Do
NOT disconnect the current computer and reconnect a different one to
the channel you are accessing, or you may have mouse or keyboard
input issues with that channel. When this occurs, re-select the channel
on the Selection Menu to solve the problem.
To select a different channel on the Selection Menu:
1. If you do not see the OSD on the screen, press the hot key twice
QUICKLY to activate it. The default hot key is Scroll Lock.
2. Highlight another channel and press Enter.