Filter
Top Products
Chapter 5: System Settings
54
To display the ID continuously on the screen, select "- -"
(dashes).
7. Press S to save the changes or Esc to quit the current menu or
submenu.
If pressing Esc, the message “Save the changes [Y/N/ESC]”
appears on the message bar. Press Y to save the changes, N to
abort the changes, or Esc to return to the current menu or
submenu.
To turn off the ID display function:
1. Select the ID Display field by following Steps 1 to 4 described above.
2. Press any arrow key to select the option, Off, and press Enter. The
highlight color turns yellow.
3. Press S to save the changes or Esc to quit the current menu or
submenu.
If pressing Esc, the message “Save the changes [Y/N/ESC]”
appears on the message bar. Press Y to save the changes, N to
abort the changes, or Esc to return to the current menu or
submenu.
Adjusting the ID Display Position
To adjust the channel ID position:
1. If you do not see the OSD on the screen, press the hot key twice
QUICKLY to activate it. The default hot key is Scroll Lock.
2. Press F5. The Administration Menu appears.
3. Select the first submenu, System Configuration. To select the
submenu, either press 1, or press
or to highlight it and then
press Enter.
4. Press Tab or Shift+Tab to highlight the "ID" item in the Display
Position field, and press Enter.
5. The sample ID bar appears on the screen.
Now move it to the position you prefer by pressing the arrow keys.
6. Press Enter to confirm the new position.
7. Press S to save the changes or Esc to quit the current menu or
submenu.
If pressing Esc, the message “Save the changes [Y/N/ESC]”
appears on the message bar. Press Y to save the changes, N to
abort the changes, or Esc to return to the current menu or
submenu.