Filter
Top Products
Appendix C: Compatibility with Other Raritan Products
83
P2-EUST User Station
The TMCAT1728 and TMCAT17216 switches are compatible with the
Paragon II enhanced user station (P2-EUST) with the firmware version
3F0 or earlier. If you have this device, you can use it in place of the
MCCAT user station. Moreover, P2-EUST enables the user to be located
at a distance up to 750 feet from the TMCAT17 switch. See Supported
Maximum Cable Length (on page 84) for more information.
Note: If you
r
P2-EUST's firmware is higher than 3F0, you must downgrade
the device to 3F0 or earlier versions for compatibility with
TMCAT1728/216 switches. For more information on P2-EUST, see the
Paragon II User Guide, which can be downloaded from the Raritan
website's Firmware and Documentation section
(http://www.raritan.com/support/firmware-and-documentation/).
To connect the P2-EUST user station to the TMCAT17 switch:
1. Connect the PS/2 or USB keyboard and mouse to the user station.
2. Connect the VGA monitor to the user station.