Filter
Top Products
Chapter 2: Playing Videocassettes and Discs
Chapter 2 21
Program Play
To use the program play option, you must create a playlist of songs in the order you want them to play.
Note: Once you begin adding songs from a folder to create your playlist, you cannot add songs from a different folder.
1. Choose the PROG-END option from the PLAY MODE menu.
2. Press OK (the option changes to PROGRAM).
3. Select the folder which contain the songs you want to program.
4. Add songs to the program list by highlighting a song and pressing ENTER. The song you have chosen and
the number of songs you have chosen appear at the top of the screen. For example, if you choose the
number five song within the folder and it is the first song you have chosen, PROGRAM P01:05 appears.
5. You can continue to add songs to the list from within the same folder by using the up or down arrow
button and then pressing ENTER to add it to the list.
6. When you are finished creating the list, press STOP to end the programming. Then press PLAY to begin
the program play mode.
Deleting the Playlist
To delete the entire playlist, press STOP while the disc is playing and select a different play mode.
Using the Equalizer
To access the equalizer, press the EQ button on the remote. The equalizer allows you to choose a specific sound
for an mp3 disc through the EQ TYPE option (the first screen that appears when you press EQ). Press PLAY
repeatedly to cycle through the settings which appear at the bottom of the EQ TYPE screen (PERSONAL
appears automatically when you access the EQ TYPE option). The other settings are: FLAT, CLASSIC, JAZZ,
ROCK, POPS, BALLAD, DANCE.
The PERSONAL equalizer setting allows you to adjust the decibels of each frequency (60 through 15K). Press
the left or right arrow button to select the frequency you want to adjust. Then use the up or down arrow button
to adjust the decibel (the decibel changes on the right side of the EQ TYPE screen).
1623085A.02 Discs 5/30/03, 10:27 AM21