Filter
Top Products
Chapter 1: Connections & Setup
Chapter 1 3
Installing the Player in the Car
1. Rest the player in the center of a rear seat.
2. Insert the center seat’s (lap) safety belt through the player’s retainer holes.
Important Note: Secure the player with the lap seat belt as tight as possible so
that the player does not move around.
3. Fasten seat belt strap by inserting and passing it through the player’s two slot
openings.
4. Plug the DC power cable into the DC POWER jack on the back of the player.
Attach the other end of the cable to the car’s cigarette lighter socket or DC power
socket (consult your car owner’s manual for location).
Note: Make sure the car’s ignition is on before plugging the DC power cord into
the cigarette lighter socket.
5. Adjust the LCD screen for desired viewing.
6. If desired, connect headphones to either of the two PHONES jacks on the back of
the player.
Notes: When the player is not in use, the LCD screen should be closed firmly.
Using the Player in a Hotel, Office or Home
1. Place the bottom of the player carefully on a table or other resting surface.
2. Plug the jack end of the AC power adapter into the AC POWER jack on the back of the player. Attach the
other end of the AC adapter to a standard wall outlet. Make sure to insert the blades of the power cord fully
into the wall outlet.
3. Adjust the LCD screen for desired viewing.
4. If desired, connect headphones to either of the two headphone jacks on the back of the player.
Graphics and Illustrations contained in this document are for representation only.
1623085A.01 C&S 5/30/03, 10:27 AM3