RCA 7L400MDV DVD Player User Manual


 
Chapter 4: Other Information
28 Chapter 4
VCP Problems
No power
Check to make sure all power cord connections are tight and plugged into an operating power source.
Rewind does not operate
Check to make sure the tape is not already rewound.
•Make sure you are using the correct buttons on the remote: for DVD, the buttons are on the top half of the remote. For videocassettes, the
buttons are on the bottom of the remote.
The VCP makes noise when stopped
The player is removing the tape from the playheads. A sound is normal. The head cylinder inside the player will continue to rotate for a few
minutes after you stop the unit.
Snowy or no picture during playback
Check video cable connections between the player and any connected monitor.
•Try another tape.
Streaks in picture during normal playback
Check to make sure the tape is of good quality and not worn out.
Will not play
Check to make sure there is a tape in the player.
•Try ejecting and reinserting the tape.
Check to make sure the tape is not broken.
Tape plays back in slow motion
•Press PLAY to return to normal playback.
Can’t record
This unit doesn’t record, it only plays videocassettes and discs.
1623085A.04 Other 5/30/03, 10:27 AM28