RCA pmn Satellite TV System User Manual


 
First Things First
11
Connection B
Very Good Picture and Sound Quality
To use this connection you must have:
TV with separate RF and audio/video inputs (jacks)
VCR with RF and audio/video inputs
Coaxial and audio/video cables
To connect TV, VCR and antenna or cable box:
1. Connect coaxial cables as shown.
2. Connect audio/video cables as shown.
To receive DSS
®
programming:
1. Tune TV to receive line output from DSS
®
receiver
(often called Input 1).
2. Tune DSS
®
receiver to desired channel.
To receive off-air programming (no cable box):
1. Turn off VCR and DSS
®
receiver.
2. Tune TV to desired channel.
To receive off-air programming (with cable box):
1. Turn off VCR and DSS
®
receiver.
2. Tune TV to cable box output channel (usually CH2, CH3,
or CH4).
3. Tune cable box to desired channel.
To record DSS
®
programming:
1. Tune TV to record line output from DSS
®
receiver (Input1).
2. Tune DSS
®
receiver to desired channel.
3. Set your VCR to record on line input.
To view VCR programming:
1. Tune TV to VCR output channel (usually CH3 or CH4).
VIDEO
DSS
RECEIVER
VCR
IN FROM ANT
OUT TO TV
CABLE
OR
OFF-AIR ANTENNA
L
R
VIDEO
AUDIO
LR
SATELLITE IN
AUDIO
L
IN
R
LR
VIDEO
AUDIO
AUDIO INVIDEO IN
SATELLITE
DISH
CH3
CH4
TV
OUT TO TV
IN FROM ANT
AUDIO OUTVIDEO OUT
CH4
CH3
CAUTION
Do not stack electronic
components or other objects on
top of the DSS
®
receiver. See
Safety Information, inside front
cover.