Filter
Top Products
30
VCR MAIN MENU
1 VCR Plus+ Programming
1 VCR Plus+ Programming
Recording a Program
Recording While You’re Away (VCR Plus+ Recording)
The VCR Plus+ and timer program features let you program the VCR to record up to eight different programs within a
one year period. Before using VCR Plus+ to record a program, make sure that:
• The clock is set correctly.
• A tape with safety tab has been inserted with enough tape to record the programs.
• The remote is set to control the VCR — using VCR1 (VCR2•LD).
• The VCR is set up for VCR Plus+ programming.
• If you receive all channels through a cable box or satellite receiver, complete setup on page 28.
• If you do not use a cable box for all channels, have a cable box that can be controlled by the VCR or use an
antenna, complete VCR Plus+ Setup on page 29.
VCR PLUS+
Enter Plus Code number
(from TV listing)
-
How often should this
program record?
1 One time
2 Daily (every day)
3 Weekdays (Mon - Fri)
4 Weekly (once/week)
Setting a VCR Plus+ Recording
1. Press MENU•PROG on the remote to display the VCR MAIN MENU on the
TV screen.
2. Press 1 to select VCR PLUS+.
3. Press numbers on the remote to enter PlusCode number for the program
you want to record. VCR PlusCode numbers are found in most local TV
listings.
Press CLEAR on the remote to correct an entry.
4. Press MENU•PROG to enter the program.
If the VCR does not recognize the PlusCode number, Unrecognized
number... Please re-enter appears on the TV screen. Check the number
and enter it again.
5. Press 1, 2, 3, or 4 to select type of program.
1 One time – single program recorded once.
2 Daily – program recorded at same time every day.
3 Weekdays – program recorded at same time Monday through Friday.
4 Weekly – program recorded at same time once a week.
6. Select recording speed using the SPEED button on the remote or VCR.
7. Press CLEAR repeatedly to change the program End Time and enter the
new time.
This feature allows you to extend the recording time on VCR Plus+
program before the program is saved. This option may be useful when
recording programs such as sporting events that could go past scheduled
broadcast times.
8. Press MENU•PROG to enter your program. A reminder appears which
will time out or you can press MENU•PROG to return to the VCR MAIN
MENU.
PROGRAMS OVERLAP may appear on the screen if you entered two
programs where the times overlap.
9. Repeat steps 2 – 6 for additional programs or press MENU•PROG
repeatedly to remove the menu from the TV screen.
10.
Turn off the VCR before recording time.
11. If using a cable box the VCR can control, turn on the cable box before the
recording is to begin. If using a cable box the VCR cannot control, turn on
the cable box and tune it to the channel you want to record before the
recording is to begin.
Stopping a Recording in Progress
With the VCR: Press POWER and then STOP within a few seconds.
With the Remote: Press VCR1 (VCR2•LD) and then STOP within a few
seconds.
1 One time
PROGRAM 1 - ONE TIME
Channel 08 CABLE
Start Time 02:10 PM
End Time 03:35 PM
Start Date 11/21/94 Mon
Tape Speed SLP
Press CLEAR to correct
Press MENU to save