Filter
Top Products
37
References
Location of Controls
Back Panel
CH3 CH4 Switch
Selects the channel to which you will tune the TV
to see the VCR picture if you connect the VCR
using one of the basic hookups.
IN FROM ANTENNA Connector
Receives a signal from an antenna or cable system
when attached.
OUT TO TV Connector
Passes signal to TV using the cable supplied.
VIDEO and AUDIO INPUT Jacks (L1)
Receives signals from another component, like a
VCR or camcorder, when it is connected to these
jacks. Use INPUT to select L1 for these jacks.
VIDEO and AUDIO OUTPUT Jacks
Sends signals from VCR to another component, like
a VCR or camcorder, when it is connected to these
jacks.
IN FROM
ANTENNA
OUT TO TV
CH
3 4
INPUT
AUDIO VIDEO
OUTPUT
AUDIO VIDEO