Filter
Top Products
6. Turn on the VCR.
A. Press VCR1 on the remote.
Setup Menu Appears Automatically
The first time you turn on the VCR, the SETUP menu will
appear. Follow the steps on the screen to automatically
setup a satellite receiver or cable box, auto channel search,
automatically set the time, and select some feature options.
1. Press number button 1 on the remote to Begin setup.
Proceed to Step 7.
2. Press number button 2 on the remote to Cancel the
setup.
If you choose not to use the SETUP menu, follow the
steps in this section to manually set up the VCR so it
will operate properly.
If you skip auto channel search during setup, the auto
clock set feature will not be performed in this sequence.
Select SETUP Menu Using VCR MAIN MENU
If the SETUP menu does not appear, you can select it using
the VCR MAIN MENU. Each of these features (except the
automatic clock set) may also be performed individually.
To select the SETUP menu.
1. Press MENU•PROG to display the VCR MAIN MENU.
2. Press 5 to display the SETUP menu.
SETUP
The setup procedure
will help you configure
your VCR. Would you
like to begin the
setup procedure now?
1 Begin setup
2 Cancel
10
Setting Up the VCR
Startup
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
4. Turn on the TV.
A. Turn on the TV.
B. If you used one of the basic hookups, tune the TV to the
channel selected with the CH3 CH4 switch on back of VCR.
If you used one of the advanced hookups, tune the TV to the
TVÕs video input. (See TV ownerÕs manual for details.)
5. Use the on-screen menu system.
Point and Select is the method you use to move through the menu
system. There are two ways to select (or change) a menu or
feature.
¥ Using the Number Buttons: Press MENU•PROG to display
the VCR MAIN MENU. Then use the number button on the
remote that corresponds to the number on the menu to select
(or change) an item. Using the number button allows you to
point and select a menu item at the same time.
¥ Using the MOVE Arrow buttons: Press MENU•PROG to
display the VCR MAIN MENU. Then use the MOVE or
arrow button to point to a menu or item. Press MENU•PROG
to select (or change) the item.
Although there are two ways to access the menu system, only
the number buttons are referenced throughout this manual to
explain the VCR features and operations.
MENU
PROG
•
6
1
4
7
3
9
2
5
8
0
M
MOVE
SETUP
The setup procedure
will help you configure
your VCR. Would you
like to begin the
setup procedure now?
1 Begin setup
2 Cancel