Filter
Top Products
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
TIMER RECORDINGS
1 Create a New Program
2 Review Existing Progs.
44
Recording a Program
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the
AUDIO and VIDEO IN jacks of the VCR. Recording
from the line input is convenient if you have a satellite
receiver or similar component attached to these jacks.
To timer record from the component connected to the
VCRÕs line input:
Press INPUT to enter the channel number when you
program the timer. Enter VIDEO1 to record from the
jacks on the back of the VCR or VIDEO2 to record from
the jacks on the front of the VCR.
Recording While You’re Away
Program 1 (One Time)
Channel 08
Start Time 02:10 PM
End Time 03:35 PM
Start Date 11/18/96 Mon
Tape Speed SLP
Press DISPLAY to edit
Press CLEAR to delete
Press MENU for next prog
Program 1 (One Time)
Channel VIDEO1
Start Time --:--
End Time --:--
Start Date --/--/--
Tape Speed SLP
Press CLEAR to correct
Press MENU to exit
Check, Edit, or Clear a VCR Plus+ or Timer Recording
1. Press MENU•PROG on remote to display VCR MAIN
MENU on TV screen.
2. Press 2 to display the TIMER RECORDINGS menu.
3. Press 2 for Review Existing Progs. feature.
The first program in the timer is displayed.
¥ Check the Programs: Press MENU•PROG to display
information for the next program.
¥ Edit the Program: Press DISPLAY to edit the program.
The frequency menu appears first so you can change
how often you want to record the program.
Press a number button to select the type of program you
want to record.
Edit the rest of the program using the CLEAR and
number buttons.
¥ Clear the Program: Press CLEAR when the program
appears.
Program 2 (One Time)
Channel 08
Start Time 2:10 PM
End Time 03:35 PM
Start Date 11/18/96 Mon
Tape Speed SLP
Press CLEAR to correct
Press MENU to save
How often should this
program record?
1 One Time
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (Once per week)
0 Cancel