RCA VR688HF VCR User Manual


 
21
Using the Remote Control
MOVE Arrow
Buttons ( )
Allow you to move through the
menus, enter data and change
settings of selected features.
CHAN Up or Down
Selects next higher or lower
channel in the TVÕs channel
memory when remote is set to
control a TV.
CLEAR
Removes menus or status
displays from the screen.
DISPLAY
Shows the status displays on the
screen.
Removes menus or displays from
the screen.
MUTE
Turns the TV sound on or off.
Numbers (0 through 9 )
Select a channel up to 99 by
pressing two numbers.
Select a cable channel over 99 by
pressing and holding 1 until 1– –
appears on the screen. Then press
the other two numbers.
PWR (Power)
Turns off a compatible TV when
remote is set to control TV.
Press twice to turn off all
compatible RCA components.
Used with TV button to turn on a
compatible TV, other than RCA,
when the remote is programmed
to control that TV. See page 23.
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then use
the number buttons to select
another. Press PREV CH to
switch between the two channels.
Used as an ENTER button on
some TVs.
SLOW – / +
Used with the TVÕs menus to
select and adjust features.
VOL Up and Down
Raises and lowers sound.
PAUSE
Pauses action for viewing during
playback.
Pauses recording to prevent
recording of unwanted scenes.
PLAY
Plays a tape.
PWR (Power)
Turns off VCR when remote is set
to control the VCR.
Press twice to turn off all
compatible RCA components.
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then use the
number buttons to select another.
Press PREV CH to switch between
the two channels.
REC
Starts VCR recording.
Used for express recording (XPR).
See page 44.
REW (Rewind)
Rewinds the tape when the VCR is
stopped.
Searches the picture in reverse
motion during playback.
SEARCH
Displays INDEX, GO-TO, and
BLANK SEARCH menus on TV.
Used during playback with the
COMMERCIAL
ADVANCEª
feature. See pages 36-37.
SLOW – / +
Used for slow-motion playback.
SPEED (Tape Speed)
Selects a recording speed
(SP, LP, or SLP).
STOP
Stops the normal functions such as
record, playback, rewind, fast
forward, and pause.
TRACKING Up and Down
Lets you manually reduce the
streaks that may appear on the
picture during play or pause.
Reduces picture ÒjitterÓ during
stop-action playback.
TV•VCR
Switches the picture signal so
that it either comes from the VCR
or the TV channel. See page 18.
VCR Function Buttons
(continued)
TV Function Buttons
Press the TV button to set remote to control a compatible TV. Some buttons may not work with every TV.
CHAN Up or Down
Selects next higher or lower
channel.
Numbers (0 through 9)
Select a channel using the number
buttons.
PWR (Power)
Turns off a compatible cable box
or satellite receiver when remote
is set to control it.
Press twice to turn off all
compatible RCA components.
Cable Box and Satellite Receiver Function Buttons
Press the SAT•CABLE button to set remote to control a compatible cable box or satellite receiver. Some buttons
may not work with every cable box or receiver. If you have a compatible RCA brand receiver, test the ÒTV
Function ButtonsÓ to see which ones operate the receiver.
Buttons