Filter
Top Products
17
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
Setting Up the VCR
Startup
continued on next page
11. Add or remove channels from the VCR’s memory.
You may want to add or remove channels if some of the
channels are not active, have weak signals, or you do not
want to watch them.
We recommend channels be placed in memory using the
Auto Channel Search feature before adding or removing
channels. Channels 2-13, L1 and L2 are preset at the
factory.
A. Press VCR1 (VCR2•DVD) on the remote, whichever
you select in Step 10.
B. If the VCR MAIN MENU does not appear on the TV
screen, press MENU•PROG on the remote.
C. Press 4 to display the CHANNELS menu.
D. Press 2 to display the ADD/REMOVE CHANNELS
menu.
E. Follow the directions on the screen.
F. Add or remove more channels by entering channel
numbers or using CHAN up or down.
Auto channel search using the
CHANNELS menu.
If you ever need to repeat Auto Channel Search because
you change cable or antenna signals:
A. Press MENU•PROG to display the VCR MAIN MENU
on the TV screen. If this menu does not appear:
¥ Make sure TV is tuned to same channel as the CH3
CH4 switch on the back of the VCR or the TVÕs
video input (refer to TVÕs manual).
¥ Press VCR1 (VCR2•DVD), then press MENU•PROG
again.
¥ If you use a basic hookup, check VCR indicator in
display panel Ð it should be on. Press TV•VCR to
turn it on.
¥ Check the connections.
B. Press 4 to display the CHANNELS menu.
C. Press 1 to begin Auto Channel Search.
The VCR automatically selects the Signal Type:
CABLE (cable TV) or ANTENNA. If you need to
change the setting manually, press 3.
ADD/REMOVE CHANNELS
Channel 11
is presently ADDED
Press CLEAR to remove
Press MENU to exit
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
5 Cable box Setup
6 DSS Setup
0 Exit
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
5 Cable box Setup
6 DSS Setup
0 Exit