Filter
Top Products
EYE-Q
TM
SETUP
The EYE-Q
TM
SETUP procedure needs to be done only once after
projector is correctly installed or whenever the projector is rein-
stalled in another position.
To enter the EYE-Q
TM
SETUP menu:
Highlight EYE-Q
TM
by pushing the or keys of the con-
trol disc.
Press the <ENTER> button to set the correct projector con-
figuration.
Setting the Configuration
When using a rear screen projector, this option must be set to rear.
Follow the steps described below to set the right configuration:
Highlight FRONT (or REAR) by pushing the or keys
of the control disc.
Press the <ENTER> button to set the correct projector con-
figuration.
The EYE-Q
TM
SETUPmenu provides you with easy to use methods
to focus the camera lens and to center the camera.
Please pay attention while doing it, as a properly focused cam-
era lens and correctly centered camera are prerequisites for a
perfect automatic convergence.
APX-4