Filter
Top Products
The Wi-Fi Direct function allows you to
connect Wi-Fi Direct devices to the player
and each other using a peer-to-peer
network, without a wireless router.
✎
■
Some Wi-Fi Direct devices may not
support the AllShare function if
connected via Wi-Fi Direct. If this is the
case, we recommend that you change
the network connection method you
used to connect the devices.
■
Bluetooth transmissions can interfere
with the Wi-Fi Direct signal. Before
you use the Wi-Fi Direct function, we
strongly recommend that you turn off
the Bluetooth function of any active
mobile device.
Turn on the Wi-Fi direct device and
activate its Wi-Fi Direct function.
In the Home screen, select ,
and then press the
v
button.
Select , and then press the
v
button.
Select , and then press the
v
button.
The Wi-Fi Direct devices that you can
connect to appear.
You have three ways to complete the
Wi-Fi connection:
●
Through the Wi-Fi device.
●
Through the player using PBC.
●
Through the player using a PIN.
Each is covered below.
On the Wi-Fi device, follow the
procedure on the device for connecting
to another Wi-Fi Direct device. See the
device's user manual for instructions.
When you have completed the
procedure, you should see a pop-up on
your TV screen saying that a device that
supports Wi-Fi Direct has requested to
connect. Select , and then press the
v
button to accept.
The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the
Wi-Fi Direct screen as connected.
Select the Wi-Fi Direct device you want to
connect to this player, and then press the
v
button. The PBC/PIN pop up appears.
Select , and then press the
v
button. The PBC pop-up appears.
Press the PBC button on the Wi-Fi
Direct device within 2 minutes.
The Connecting pop-up appears,
followed by the Connected pop-up.
When it closes, you should see the
device listed on the Wi-Fi Direct screen
as connected.
Select the Wi-Fi Direct device you want
to connect to this player, and then
press the
v
button. The PBC/PIN pop
up appears.
Select , and then press the
v
button. The PIN pop-up appears.
Note the PIN code in the pop-up, and
then enter it into the appropriate field
in the Wi-Fi Direct device you want to
connect.
The Connecting pop-up appears,
followed by the Connected pop-up.
When it closes, you should see the
device listed on the Wi-Fi Direct screen
as connected.
✎
■
The current wired or wireless network
connection will be disconnected when
you use the Wi-Fi Direct function.
■
Text files, such as files with a .TXT or
.DOC extension, do not display when
you are using the Wi-Fi Direct function.
The Screen Mirroring function lets you
view the screen of your smart phone
or android tablet on the TV you have
connected to the Blu-ray player.
In the Home menu, press the ▲▼
◀▶
buttons to select and
then press the
v
button. The Screen
Mirroring pop-up appears.
Launch AllShare Cast on your device.
On your device, find the name of the
Blu-ray player in the list of available
devices and then select it.
The TV will display a PIN. Enter the PIN
into your device.
The TV displays a connecting
message (for example, Connecting to
Android_92gb...) and then displays the
connected message.
In a few moments, the screen of your
device appears on the TV screen.
To stop Screen Mirroring, press the
or button on the remote
control, or shut off the Screen Mirroring
function on your smart phone.
✎
■
You can connect to a device that
supports AllShare Cast. Note that
connecting to such a device may not
be fully supported depending on the
manufacturer. For further information
on mobile connection support, refer
to the manufacturer’s web site.
■
When you are using the Screen
Mirroring function, video stuttering
or audio dropouts may occur,
depending on your environment.
■
Bluetooth transmissions can
interfere with the Screen Mirroring
signal. Before using the Screen
Mirroring function, we strongly
recommend that you turn off the
Bluetooth function on your smart
phone or smart device (tablet, etc.).
The Device Name function allows you to
change the player's name by selecting
from a device name list box.
Set to allow or prohibit an Internet
connection when you use the BD-LIVE
service.
●
: The Internet connection is
allowed for all BD-LIVE contents.
●
: The Internet
connection is allowed only for BD-LIVE
contents containing a valid certificate.
●
: No Internet connection is
allowed for any BD-LIVE content.
✎
■
When the player uses BD-LIVE to
send the disc data and a request
to the server to certify the disc, the
server uses the transmitted data to
check if the disc is valid and sends
the certificate back to the player.
■
The Internet connection may be
restricted while you are using BD-
LIVE contents.