Filter
Top Products
Lets you set the color space format
for HDMI output to match the
capabilities of the connected device
(TV, monitor, etc).
Lets you output video from the
HDMI OUT jack with Deep Color.
Deep Color provides more accurate
color reproduction with greater color
depth.
Lets you improve picture quality when
viewing DVDs.
Sound Settings
Lets you select the digital audio
output format that is suitable for your
TV or AV Receiver. For more details,
please refer to the Digital Output
Selection table to the right.
Audio
Stream on
Blu-ray
Disc
PCM
Up to
7.1ch
PCM 2ch
PCM
PCM 2ch
Re-encoded
DTS
Re-encoded
Dolby Digital *
Dolby
Digital
PCM 2ch PCM 2ch
Dolby
Digital
Dolby
Digital
Re-encoded
DTS
Re-encoded
Dolby Digital *
Dolby
Digital Plus
PCM 2ch PCM 2ch
Dolby
Digital Plus
Dolby
Digital
Re-encoded
DTS
Re-encoded
Dolby Digital *
Dolby
TrueHD
PCM 2ch PCM 2ch
Dolby
TrueHD
Dolby
Digital
Re-encoded
DTS
Re-encoded
Dolby Digital *
DTS
PCM 2ch PCM 2ch
DTS DTS
Re-encoded
DTS
Re-encoded
Dolby Digital *
DTS-HD High
Resolution
Audio
PCM 2ch PCM 2ch
DTS-HD High
Resolution
Audio
DTS
Re-encoded
DTS
Re-encoded
Dolby Digital *
DTS-HD
Master
Audio
PCM 2ch PCM 2ch
DTS-HD
Master
Audio
DTS
Re-encoded
DTS
Re-encoded
Dolby Digital *
Audio
Stream on
DVD
PCM
PCM 2ch PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch PCM 2ch
Dolby Digital
PCM 2ch PCM 2ch
Dolby Digital Dolby Digital
Dolby Digital Dolby Digital
DTS
PCM 2ch PCM 2ch
DTS DTS DTS DTS
Definition
for
Blu-ray
Disc
Any
Decodes main
feature audio and
BONUSVIEW audio
stream together
into PCM audio and
adds Navigation
Sound Effects.
Outputs only main
feature audio stream
so that your AV
receiver can decode
the audio bitstream.
You will not hear
BONUSVIEW audio
and Navigation
Sound Effects.
Decodes main
feature audio
and BONUSVIEW
audio stream
together into PCM
audio and adds
Navigation Sound
Effects, then re-
encodes the PCM
audio into DTS
bitstream
Decodes main
feature audio
and BONUSVIEW
audio stream
together into PCM
audio and adds
Navigation Sound
Effects, then re-
encodes the PCM
audio into Dolby
Digital bitstream
If Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied.
*
✎
If the TV you connected to the player
■
does not support Movie Frame or
the resolution you selected, the
message "If no pictures are shown
after selecting ‘Yes’, please wait for
15 seconds to return to the previous
resolution." appears. If you select
, the TV’s screen will go blank for
15 seconds, and then the resolution
will revert to the previous resolution
automatically.
If the screen stays blank after you
■
have changed the resolution, remove
all discs, and then press and hold the
^
button on the front of the player
for more than 5 seconds. All settings
are restored to the factory default.
Access the Resolution function and
reset the output resolution to a
resolution that is compatible with
your TV.
When the factory default settings
■
are restored, all stored user BD data
is deleted.
The Blu-ray Disc must have the 24
■
frame feature for the player to use
the Movie Frame (24Fs) mode.
Setting the Movie Frame (24Fs) feature
to Auto allows you to adjust the
player’s HDMI output to 24 frames per
second for improved picture quality.
You can enjoy the Movie Frame (24Fs)
feature only on a TV supporting this
frame rate. You can select Movie
Frame only when the player is in the
HDMI 1080p output resolution mode.