Filter
Top Products
Connecting & Setting Up
Case 3 : Component Video
output jacks
1. Connect Component video cables(not supplied)
between the COMPONENT OUT(Y,P
B
,P
R
) jacks on
DVD Recorder and COMPONENT IN(Y,P
B
,P
R
) jacks
on your TV.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO
IN jacks on TV (or AV amplifier).
(See pages 21-22).
3. After connecting, refer to the page 34 to 35.
●
You will enjoy high quality and accurate colour
reproduction images.
■
Make sure that the colour coded
connections match. The Y, P
B
, P
R
component output jacks of your DVD
Recorder must be connected to the exact
corresponding component input jacks on
your TV.
■
Progressive setting is only available when
the Video Out is set to Component.
(See page 34)
NOTE
green
blue
red
green
blue
red
20
- English
Case 2 : Connecting to an
S-Video output jack
1. Connect an S-Video cable (not included) between the
S-VIDEO OUT jack on DVD Recorder and S-VIDEO
INPUT jack on your TV (or AV amplifier).
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on DVD Recorder and AUDIO IN
jacks on TV (or AV amplifier).
●
You will enjoy high quality images.
01003A-R128,130-XEU_18~40 2/20/06 7:48 PM Page 20