Filter
Top Products
44
- English
Recording
2
Press the OPEN/CLOSE button to close
the disc tray.
Wait until “LOAD” disappears from the front panel
display.
If an unused DVD-RW disc is used, whether to
initialize or not will be asked first. (See page 40.)
3
Press the REC MODE button repeatedly,
(or Press the REC MODE button, then
press the …† button) to select the
recording speed(quality).
➞
SP ➞ LP ➞ EP ➞ XP
4
Press the INPUT SEL. button to select DV.
If the input is set to DV, a playback/record menu that
enables camcorder control appears on the top of the
screen.
5
To play the camcorder and find the starting
point to be copied, select the play icon( )
on the top of the screen using the œ √
buttons and then press the OK button.
6
To start recording, select the record icon( )
on the top of the screen using the œ √
buttons and then press the OK button.
You can also use the REC button on the remote
control to start recording. (If your camcorder is in stop
mode, the REC button doesn't work.)
To stop recording
Press the STOP button to stop or finish a recording
in progress.
●
When using DVD-RW/DVD-R discs, the message
‘Updating the disc information. Please wait for a
moment.’ is displayed
■
You can not change the recording mode and
input source while recording.
■
Recording will stop automatically if there is
no free space left for recording.
■
Up to 99 titles can be recorded onto a disc.
■
Recording will stop automatically if a copy
protected image is selected.
■
DVD-RW discs must be formatted before
starting to record. Most new discs are sold
unformatted.
■
Do not use DVD-R authoring discs with this
DVD Recorder.
■
If you connect a camcorder using DV jack,
the related contol menu appears
automatically. To access on the screen
controls during recording, press
œ
or
√
button.
NOTE
Making a One Touch
Recording (OTR)
You can set the DVD Recorder to record in preset
increments by pressing the REC button repeatedly.
1
If you want to record a TV channel, press
the PROG ( / ) or number buttons to
select a desired channel.
If you want to record through a
connected external component, press the
INPUT SEL. button to select an
appropriate external input [AV1, AV2,
AV3 or DV(DVD-R130, R131 only)].
● TV PROGRAMME: 1 to 99
2
Press the REC button to start recording.
3
Press the REC button repeatedly to adjust
the desired recording time.
➞ 0:30 ➞ 1:00 ➞ ... 4:00 ➞ 5:00 ➞ ... 9:00 ➞normal
■
The timer counter decreases by the
minute from 9:00 to 0:00, then the DVD
Recorder stops recording and is
powered off.
NOTE
Record Mode SP(02:12)
DV
The DV device is connected.
RETURNOKMOVE
01003A-R128,130-XEU_41~48 3/11/06 9:27 AM Page 44