Samsung DVD-R128/X DVD Recorder User Manual


 
English -
89
Remote Control Unit
Read the table of contents and then
find and read the section describing
your problem, follow the instructions
given.
Turn your DVD recorder off and on.
If the problem still persists, contact a
nearby Samsung service centre.
Checkpoint 1
Checkpoint 2
Checkpoint 3
Other problems.
Point the remote control at the remote
control sensor on your DVD recorder.
Allow for proper distance. Remove
obstacles between your DVD recorder
and the remote control.
Check whether the batteries are empty.
Check for the TV/DVD selection button.
Checkpoint 1
Checkpoint 2
Checkpoint 3
The remote control doesn't work.
A recorded disc is played with only the
subtitle and the audio signal which
were selected during recording.
Checkpoint 1
Is it possible to change a subtitle and an audio sig-
nal on a recorded disc?
Other
Press and hold down the PROG ( )
buttons on the front panel of the DVD
Recorder simultaneously for more than 5
seconds with no disc in the DVD Recorder.
All settings including the password will
revert to the factory settings. Do not use
this unless absolutely necessary. (Note that
this function is possible only when no disc
is inserted.)
Checkpoint 1
I forgot my password for parental supervision.
Additional Information
01003A-R128,130-XEU_86~92 2/20/06 7:55 PM Page 89