Filter
Top Products
English - 24
Chapter Three
OPERATION
Turning the TV On and Off
Press the POWER button.
You can also use the POWER button on the front panel.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed
automatically and subsequently: Setting the language, Antenna input
check, Channel Memorize and Time Setting.
Note : The Plug & Play function operates after plugging in the TV
for the first time.
1
Press the POWER button
on the remote control.
The message “Menu
language, channels and
time will be set.” is
displayed.
Press the ENTER button,
then “Select the language
of OSD” menu is
automatically displayed.
2
Press the ENTER button to
enter the language.
Press the … or † button
to select language, then
the ENTER button.
“Ant. input check” menu
is automatically displayed.
3
Press the … or † button
to memorize the channels
of the selected
connection. Press the
ENTER button to select
“Start”.
When selecting Cable TV :
Press the … or † button
to select “Cable”, then
press the ENTER button.
Press the … or † button
to select “STD”, “HRC” or
“IRC”, then press the
ENTER button.
continued...
Select the antennas to memorize
Air
Cable
Air + Cable
Start
Start
Start
Select the cable system.
STD
HRC
IRC
Select the language of the OSD
Menu Language :
English
Spanish
French
Menu language, channels
and time will be set.
Start
œ If the CableCARD is inserted
into the “CableCARD” slot on
the rear panel, “Cable” and
“Air+Cable” are not available.
BP68-00334A-00Eng 5/20/04 4:52 PM Page 24