Filter
Top Products
English - 26
OPERATION
Adjusting the Screen Automatically (Self Focus)
The “Self Focus” feature automatically sets the optimum picture quality when blurring,
overlapping colors or incorrect focus occurs. These conditions may be caused by moving your
TV.
Activating the Automatic Execution of the Self Focus
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Picture”, then
press the
ENTER button.
2
Press the ▲ or ▼ button
to select “Self Focus”, then
press the ENTER button.
3
“Self Focus” is selected.
Press the ENTER button
again.
The self focus process
begins with the message
“Self Focus” and a
horizontal bar is
displayed.
When it is finished, the
menu will disappear and
the optimum picture
quality can be enjoyed.
Mode : Dynamic √
Custom √
Color Tone : Normal √
Size √
DNIe : On √
Self Focus √
PIP √
T V Picture
Mode : Dynamic √
Custom √
Color Tone : Normal √
Size √
DNIe : On √
Self Focus √
PIP √
T V Picture
Self Focus √
Auto Perform : On √
Message Display : On √
Self Focus
T V
œ During the process, minor
distortions of the picture may
occur. At this time, the colors
may diffuse and a searching
pattern will appear on the edges
of the screen. This is a normal
part of the adjustment.
• Changing channels and any other signal changes will pause the self focus until a stable signal has
returned. It resumes after the signal has been stabilized. This feature will not work without a signal
• Ambient light that is too bright may affect the self focus. If this occurs, darken the environment and
try again.
BP68-00334A-00Eng 5/20/04 4:52 PM Page 26